Vicon Rotex Combi 700 - 703 - 800 - 803

Rotex Combi 700 smidig snitt- och transportvagn med kapacitet på över 80 m³.

Komibvagn

Den nya Rotex Combi 700 är en kombivagn som höjer kapaciteten till nya dimensioner. Modellen erbjuder lastkapacitet på över 80 m³. Rotex Combi 700 - 703 och 800 - 803 erbjuder flera attraktiva funktioner såsom det nya innovativa MaxiFlow pick-up systemet med hydraulisk drivlina, ISOBUS kontrollsystem, kraftig boogietandemaxel med följande styrning samt en generöst dimensionerad kedja och medbringare som ger en absolut och effektiv avlastning.

Fördelar:

  • MaxiFlow pick-Up ger hög kapacitet på inmatningsrotor utan kurvbana.
  • hydraulisk drivning av pickupen med centrerad fjäderupphängning.
  • 25 mm breda tenar på snittrotorn garanterar ett effektivare flöde.
  • Inmatningsrotor med hög kapacitet (800mm rotor).
  • Rotex Combi snittsystem med 40 knivar.
  • Enkelt underhåll - knivbryggan fälls ned och svingas ut vid sidan av maskinen för enkelt byte av knivar.
  • IsoBus kompatibel.
  • Kraftig boogie tandemaxel.
  • Generöst dimensionerad kedja och medbringare för effektiv avlastning.

Läs mer om vårt grässortiment!

Tekniska specifikationer:

  Lastkapacitet DIN
(extended tailgate)
Lastkapacitet Medium Compression
(extended tailgate)
Max vikt
703 34,8 m³ 69,6 m³ 24000 kg
700 34 m³(36,4) 68 m³ (72,8) 24000 kg
803 40,1 m³ 80,2 m³ 24000 kg
800 39,3 m³ (41,7) 78,6 m³ (83,4) 24000 kg
Rotex Combi 803

MaxiFlow Pick-Up

  • The new MaxiFlow pick-up features a hydraulic driveline mounted onto the pick-up, without the need for the traditional gearbox and chain drive that limits the flexibility in ground adaptations
  • The hydraulic driveline of the pick-up reduced power requirement by up to 15% compared to the traditional gearbox and chain drivelines.
  • The hydraulic driveline features a centre pivot suspension of the entire pick-up unit that offers transverse adaptation of +/- 100mm on each side of the pick-up unit.
  • The new 2m MaxiFlow pick-up is without cam tracks. The uncontrolled pick-up unit gives less wear compared to a pick-up with cam track steering.
  • The MaxiFlow intake system uses staggered tines on the pick-up, operation in combination with the roller crop press, to deliver a uniform flow of material across the full width of the chopping rotor.
  • Should a blockage occur in the intake system, the new hydraulic driveline allows the  possibility to reverse the pick-up to clear blockages in seconds from the tractor seat.
  • A pressure control valve inside the hydraulic driveline protects the entire pick-up unit from overload and damage, in case of the intake system struggling in heavy crop conditions or  when hitting a foreign obstacle.
  • Intake speed of the pick-up can be adjusted from the tractor seat, allowing the operator to customize speed to current swath size and forward driving speed.

Strong Rotor Design

  • 25mm wide input tines ensure efficient crop flow with a minimum of power requirements.
  • High capacity intake with 800mm diameter rotor.
  • Pre-chopping system with 40 knives.
  • Theoretical chopping lengths of 38mm.
  • Individual spring protection of the knives.
  • The large 800mm diameter rotor is driven by the maintenance-free oil immersed gearbox that ensures trouble-free operation
  • Easy maintenance – the complete knife unit is swung out for easy access.
  • The complete knife unit is easy accessible for daily inspection and maintenance. The
  • chopping unit is simple lowered and swung out.
  • The knives are quickly released without the use of tools.
  • The 25mm wide input tines, arranged in a chevron pattern, move the crop efficiently towards the cutting knives without friction or crop loss.

Boogie Axles

  • The new Rotex Combi is fitted with a four tonnes hydraulically articulated drawbar designed to bear even the heaviest loads when working with both grass silage and maize
  • The strong and very stable tandem axle offers smooth operation and is designed for safe and fast transport of the crop to the silage clamp or when working off-road in the field.
  • The Rotex Combi is fitted with parabolic spring loaded boogie axles. The asymmetric mounted springs and wide distance of the suspension ensures that both axles are balanced at any time.
  • This provides even weight distribution with load evenly distributed on all 4 wheels. This makes the Rotex Combi easier to pull, and reduces soil compaction and tyre wear when operating in the field.
  • The standard level of specification comprises a hydraulic brake system and XXL 700/50R 26.5 tyres, but will accept tyres up to 800mm wide, which significantly reduces ground pressure.
  • The Rotex Combi is standard fitted with steered wheels, improving manoeuvrability when space is limited. 

Fast Unloading

  • The large dimensioned hydraulic chain-and-slat conveyor is split into two segments and features four heavy duty chains designed to bear even the heaviest of loads.
  • The scraper floor automatically disengages when the chamber is full.
  • Loading and unloading speed is infinitely adjustable and sensors warn via the control box when the chamber is full.
  • The Rotex Combi offers very fast and efficient unloading of the material. The large tailgate in combination with the adjustable speed of the chain-and-slat conveyor provides very fast unloading of the material so no time is lost.
  • The sensor controlled tailgate is operated hydraulically. The tailgate is mechanically closed and is monitored by two sensors, showing the position on the control terminal.
  • The Rotex Combi is fitted with three large diameter discharge rollers, which are driven by maintenance friendly driveshaft, to unload the material in a uniform and even mat, reducing the need for evening out the clamp afterwards.
  • The Rotex Combi features heavy duty side walls made of galvanised powder painted steel plates. The vertical side plates move the material to the rear of the chamber, ensuring a full load.

ISOBUS Control

IsoMatch Tellus GO

  • The IsoMatch Tellus GO is a Universal ISOBUS Terminals and has a new multifunctional one-screen terminal.
  • It is developed for fast and simple control of any ISOBUS implement, giving the farmer a ‘custom made’ experience as it suits all needs for plain and efficient handling of farming machinery and tasks.
  • With the easy to use application, Isomatch GEOCONTROL, it is possible to boost efficiency and save time and costs. The application includes Manual Guidance, Section Control and Variable Rate.
  • Whether it is used with fertiliser spreaders, sprayers or seed drills, Precision Farming is just one click away.

IsoMatch Tellus Terminal

  • The IsoMatch Tellus is also a virtual terminal, offering two Interface screens in one terminal.
  • The large 12” easily programmable touch screen offers ergonomic use and is designed for long days of operation.
  • Due to the increasing number of functionalities that can be added to a machine such as cameras, the operator can use the loader wagon interface in the top screen and a camera display in the bottom screen, to monitor the unloading process.
  • Another possibility is to use the loader wagon interface in the top screen and the tractor interface screen at the bottom.